The creation of works of sculpture on sandstone carvings in the
sandstone and carved on boulders. This will require a skilled technician. And
take a long time to create sculptures offering several equally, but it takes
time bringing modern technique is to create a handsome sandstone sculpture art
imitates old-fashioned. Easier and more details can clearly be said to be
better able to provide detailed carvings directly. It can take on a body
of clay. The easier
Equipment
1.
The making of clay
2.
Use a silicone rubber
mold.
3.
Pour the plaster mold
silicone rubber exterior solace.
4.
Crushed stone
5.
Sand quality options,
like sandstone grinding.
6.
White cement
7.
Soil color is mixed with
white cement to the desired color.
8.
Mortar Mixer
Procedure type silicone rubber. Follow these steps:
1.
Prepare the soil to the
desired size of the cast. The making of
2.
Shapes and sculptures
carved by the need, which is both sculptural reliefs. Canoeing and
floating Until the desired look, which is used as a puppet master.
3.
Brush with oil, silicone
puppets on clay over the baton several times until a thickness equal. So
that there is resistance to casting sandstone.
4.
Cement plaster over a
thin silicone dry. The plaster mold fitting template. Silicone rubber
for stability.
5.
Sheep clay away leaving
the mold silicone rubber and plaster mannequins tire if a robot sculpture
floating chipping clay out of the rubber mold may be difficult to look like
this would cement plaster that can be terrible. into sections for ease of
carving the clay out of silicone rubber. Lamb grounded out when the mold
is completed. It will take the form of a mixture of clay, sand casting
further.
Sand casting process Follow these steps:
1.
Remove sandstone crushed
by grinding or crushing. Then glide to the size hook to some extent.
2.
Remove sandstone crushed
and mixed with sand in a ratio of 1: 1 sandstone and sand mix will have to
choose the kind that has the same texture and color. When mixed together,
will be harmonious.
3.
The mixture of crushed
stone and sand mixed accordingly mixed with white cement using a mixture of
crushed stone, sand Bains 1.5 3 cement mix well. For liquid enough to pour
into the mold anywhere. The water was still in the mix.
4.
Pour the mixture into
the prepared mold inserts into every part of the form and leave it 1-2 days, so
take away the forms.
5.
After removing the
sandstone AMC print and then stick to that until dry and then rinse thoroughly
with dishwashing liquid.
6.
The specimen is then
thoroughly washed and polished with polish concrete floors to bite off a sand
emerged. Sandstone really look like
To
make it antique
Upon completion of the process of casting off the sheep, specimens were created
and polished until the sand like a job then carved sandstone. It is believed
that completed sales. If you want to decorate a colorful look as old as
the popularity of online customers. This is how it can be done by doing
the following.
1.
If the piece is inserted
between the black sand on the surface of the work. Prepared byBlack called
slip. Which is made from black clay made from fermented rice fields into
mud filter. It has a thick black liquid. Like flour The water is
mixed with the paint job, let it dry and then clean black sticks in the sand. He
looked even more antiques.
2.
If you want to work with
red. It is similar to clay dirt to get hot. Dust, soil into a fine
powder in water with liquid fermentation of dust, dirt Bong-applied to the left
to dry. Then clean Specimens will be
red because of iron ore powder dissolved sheep stuck. If you want
to mix the two colors brought out both water and soil mix, then follow the
process.
No comments:
Post a Comment